How To Clean Pool Tile With Muriatic Acid Right Way. Pour a small amount of the cleaning solution on the stained tiles. Now mix the soda ash into the acid mixture at the bottom of the pool.
Use a nonabrasive scouring pad to remove the hard water stains. For the reason that muriatic acid is a harsh chemical, blend it outside. Now move the hose towards the next section of the tile.
Spray The Acid Wash On The Affected Areas And Let It Sit For Five Minutes.
Do not attempt to clean the tiles from inside the pool. Next, slowly pour a cup of muriatic acid into the water. Follow the aggregate with a nylon scouring pad in small circles over the tile.
Pour A Small Amount Of The Cleaning Solution On The Stained Tiles.
Make sure to put on rubber gloves and safety goggles while creating this cleaning mixture. Starting from each section, pour down a small amount of your muriatic acid from the top, moving the can across for full coverage. Mix vinegar and water in a bowl or bucket.
For The Reason That Muriatic Acid Is A Harsh Chemical, Blend It Outside.
Now mix the soda ash into the acid mixture at the bottom of the pool. If those products don’t work as well as you expected, you can try using hydrogen peroxide with a bit of dish soap mixed in as long as the label says it won’t discolor the tile. Most hydrochloric acid is already diluted to about 31 percent.
Prepare The Muriatic Acid Wash Solution.
Use the toothbrush to clean the stain. Pumice stones can never be used on soft surfaces like pool linings and must be used. Do not pour acid into the bucket and add water afterward, as it can create a dangerous chemical reaction.
Turn On The Pool Pump And Slowly Add The Acid And Water Mixture All The Way Around The Pool’s Perimeter.
Now scrub the tile clean. Spray the pool tiles with the muriatic acid mixture. Never pour muriatic acid down a drain except when it will be diluted by water or chemical.